Speaker Outriggers

NSMT Custom Loudspeaker Outrigger Kits: Fits speakers from 3.5 inches to 14 inches wide.

Stabilize your tower loudspeakers with our custom CNC aluminum outriggers machined from quarter inch thick aluminum and powder coated black.

Our outrigger and spike kits dramatically improve performance by rigidly coupling loudspeakers enclosure to floors to improve clarity and stereo imaging and to tighten bass response. They are especially effective on uneven floors and floors with thick carpeting.

(Note: The picture above shows outriggers outfitted with the deluxe isolation cones. Our outrigger kits are shipped with standard spikes or deluxe isolation cones that are shown below)

standard speaker spike

Our standard outrigger kits include 4 outriggers, 8 screw retainer inserts and 8 screws to attach the outriggers to the speakers, 8 1/4-20 threaded spikes (seen in photo above),  8 jamnuts and 8 locking knurled top nuts to attach the spikes to the outriggers. 

deluxe speaker isolation cones with fine adjustment points and floor protectors

Our deluxe outrigger kits include 4 outriggers, 8 screw retainer inserts, 8 Phillips screws to attach the outriggers to the speaker, eight 1/4-20 threded isolation cones,  8 floor protectors, and 8 knurled top nuts (seen in photo above), to secure the isolation cones to the outriggers.

Our outrigger kits accommodate IsoAcoustics footers.

Shown: NSMT outrigger with IsoAcoustic footer and barbed retainer with attaching screw.

SMALL OUTRIGGER KIT

(Spikes shown are for illustration only)

The small outrigger measures 7.5 inches tip to tip. It has elongated mounting holes that are 2 to 3.5 inches apart. It is suitable for speakers 3.5 to 6 inches wide. The spike holes are 19/64 inches or 7.5 mm wide.

LARGE OUTRIGGER KIT

(Note: The spikes shown are for illustration only)

The large outrigger measures 11.125 inches tip to tip. It has elongated mounting holes that are 5 to 7 inches apart. It is suitable for speakers 7.25 to 9.5 inches wide. The spike holes are 19/64 inches or 7.5 mm wide..

EXTRA-LARGE OUTRIGGER KIT

The extra-large outrigger measures 15.25 inches tip to tip. It has elongated mounting holes that are 8&3/8 to 11&3/8 inches apart. It is suitable for speakers 8.25 to 14 inches wide. The spike holes are 19/64 inches or 7.5 mm wide. 

Spike Dimensions 

Spike: 3/4" L x 3/16" diameter. 

Thread on spike: 1" L x 1/4" diameter. 

Insert: 13/16" L x 3/8" diameter.

11/32 hole required for screw retainer insert

Isolation Cone dimensions

1.5 inches tall

1.5 inches widest diameter

1/4-20 thread

Insert: 13/16 diameter hole required for screw retainer insert.

NOTE: The outrigger inserts or retainers require drilling 3/8" holes and using 6 mm Allen wrench for installation.
           
            The spike and retainer holes in the outriggers are 5/16 inch or 8 mm in diameter.

            The standard spikes may be the better option for carpeted floors.

            There is a 25% restocking fee if the outrigger kit is returned.