100M natural birch
price per pair: $5,495
100M natural birch (back)
Shown with optional base and spikes.
100M black
price per pair: $4,995
Buy
Direct
|
The
100M Ambient Sound Loudspeaker
The 100M is a time coherent,
point source, first order, two-way acoustic suspension loudspeaker
with a built in full-featured 200 watt, 10 inch treated paper
cone bandpass subwoofer that delivers a stunning linear 27 Hz
to 20,000Hz plus and minus 3.5 dB performance. It is designed
to reproduce music with superior musicality, coherence, spatial
presentation, dynamics, speed and tonality. It captures every
nuance of music to accurately convey the emotionalism and spiritualism
of the performance.
The cabinet of the 100M
features an innovative new design that is only 12.5 inch deep
at the base and tapers to 11.5 inches at the top, with beveled
edges that softens its looks as well as prevent refraction. The
small foot print (12.5 X 12 inches) and good looks accent to
any decor. It is one of the most powerful compact loudspeakers
available and its 12.5 inch depth allows it to be used close
to flat panel TVs without blocking the viewing angle.
In the tradition of breakthrough
products, the 100M skillfully blends performance characteristics
that were previously thought to be contradictory: It is revealing,
but musical; dynamic, but refined. It is obvious, but enigmatic.
It has to be experienced to be believed.
Special Features: Hybrid Minimonitor-Active Subwoofer System
Minimonitor Section
Design: Magnetically shielded, acoustic
suspension, point source, first order, two-way
Drivers: Magnetically shielded, time coherent, concentric,
point source, driver array with concentric 7 inch cast
frame TPX woofer, and 1 inch soft dome tweeter
Crossovers: Laminated iron core perfect lay copper inductor,
film foil capacitors, metal oxide resistor
Wiring: DH Labs silver plated copper to tweeter. Multi-strand
copper to woofer
Connectors: Gold plated five-way bi-wire/bi-amp binding
posts
Active Bandpass Subwoofer Section
200
Watts amplifier
10 inch long-throw treated paper cone woofer*
Auto-on power switch controlled by input signal
Phase reversal switch 0° ~ 180°
Continuously variable crossover from 50Hz to 120Hz at 24 dB/octave
Volume control to adjust output
Overload and thermal and fuse protection with output relay
Gold plated RCA line level and speaker level input and output
connectors
Heavy duty gold plated binding posts
Removable IEC type power cord
Discrete TO-3P output devices
THD: Less than 0.05%
S/N ratio: Greater than 85dB
Power requirements: 120VAC, 60/50Hz
Cabinet: 3/4 inch
anti-resonant natural birch plywood with MDF braces. The front
of the cabinet is slanted 2 degrees, from the bottom to top to
align the acoustic center of the concentric driver array and
the subwoofer output and to eliminate standing waves in the cabinet.
Variable height: Height of tweeter variable
from 34 to 37 inches with use of optional base and spikes.
Finishes: Natural birch plywood or black fabric
covered cabinet with satin black end caps. Optional black grills.
Warranty: 10-year limited except for five-year warranty
on subwoofer amplifier
Technical Data:
Dimensions: 37 X 12 X 12.5 (H X W X D) (11.5 inches
deep on top)
Frequency Response: 27 Hz - 20 kHz +/- 3.5 dB
Bandwidth (-10 dB): 24 Hz - 20 kHz
Sensitivity (monitor): 88 dB 1 watt/m
Rated Impedance: 8 ohms
Minimum Impedance: 6.5 Ohms
Recommended Power: 10-200 watts
Shipping Weight: 82 pounds each
*Notes: Optional magnetic
grills, at extra cost. Subwoofer is not magnetically shielded. |
.gif)